Exterior Elevations: In addition to the front exterior, your drawing set will include drawings of the rear and sides of your house as well. These drawings give notes on exterior materials and finishes. Particular attention is given to cornice detail, brick and stone accents, or other finish items that make your home unique.
Foundation Plan: The foundation page dimensions, concrete
walls, footings, pads, posts, beams, bearing walls, and any stepped foundation
information along with any retaining wall info (schematic only). A typical wall
section for the home is also usually included on this page (if not, it is
elsewhere in your plan set, as space allows). If your plan features a poured
concrete slab rather than a basement or crawlspace, the foundation page shows
footings and details for the slab, and includes plumbing locations.
Floor Plan(s): Exterior and interior wall framing, and
windows/doors are dimensioned. Room sizes are indicated and any beams, posts
and structural bearing points are called out. The floor plans include an
electrical legend, and electrical fittings, lights and outlets are shown. Floor
Plans will also indicate cross–section details (provided on the sections page)
and show any special framing details applicable to the design. Cabinet elevations
are included for kitchen and bathrooms; some designs feature cabinet elevations
for design–related built–ins too.
Building Sections: Building sections show changes in floor, ceiling, or roof height, and the relationship of one level to another. Our section pages also show how the stairs are calculated (if there are some!) and depict roof and foundation members. We try and draw sections to show the most useful information — choosing locations where there are elements you or your contractor might need clarification on.
IMPORTANT NOTE: Sections and elevations depict the standard foundation only.
Roof Plan: Roof framing or truss directions are
shown, slope directions are indicated and structural members are sized and
called out if applicable. The gravity loads used to calculate the rafters,
beams and posts are indicated , and we also show gutters, downspouts, and any
roof venting required for your home.
Notes and Details Page(s): Your home comes detailed to meet the requirements of the latest adopted version of the ‘International Residential Code’, and our notes and details pages outline all the elements applicable to the design of your home. Compliance with further standards may need to be incorporated into your plan set, depending on the requirements of your building department — these are usually done locally.
Total Heated Area:
4,732 sq. ft.
Lower Level:
1,830 sq. ft.
1st Floor:
2,902 sq. ft.
Attached:
1,333 sq. ft.
Courtyard:
0 sq. ft.
Garage:
1,333 sq. ft.
Bedrooms:
4
Full bathrooms:
3
Half bathrooms:
2
Standard Foundations:
Walkout
Exterior Walls:
2x6
Width:
130' 0"
Depth:
79' 0"
Max Ridge Height:
33' 10"
Type:
Attached
Area:
1333 sq. ft.
Count:
4 Cars
Entry Location:
Courtyard Cars
First Floor:
10.00'
Second Floor:
10.00'
Primary Pitch:
12 on 12
Framing Type:
Truss
Total Heated Area:
4,732 sq. ft.
Lower Level:
1,830 sq. ft.
1st Floor:
2,902 sq. ft.
Attached:
1,333 sq. ft.
Courtyard:
0 sq. ft.
Garage:
1,333 sq. ft.
Bedrooms:
4
Full bathrooms:
3
Half bathrooms:
2
Standard Foundations:
Walkout
Exterior Walls:
2x6
Width:
130' 0"
Depth:
79' 0"
Max Ridge Height:
33' 10"
Type:
Attached
Area:
1333 sq. ft.
Count:
4 Cars
Entry Location:
Courtyard Cars
First Floor:
10.00'
Second Floor:
10.00'
Primary Pitch:
12 on 12
Framing Type:
Truss
