Plan 660012JMD: 5 Bed Modern Transitional-Style House Plan with 30' Disappearing Sliders

Plan 660012JMD

5 Bed Modern Transitional-Style House Plan with 30' Disappearing Sliders

Heated S.F.

2768

Beds

Baths

Stories

Cars

Plan 660012JMD

5 Bed Modern Transitional-Style House Plan with 30' Disappearing Sliders

Heated S.F.

4,714

Beds

Baths

6.5

Stories

Cars

What's Included

Floor Plan

Main Level

2nd Floor

Plan Details

Modern detailing and the use of metal, wood and stucco gives this transitional house plan great curb appeal. A 974 square foot front-facing garage with two doors adds to the appeal. Enter the home through double doors in covered entry with 17'4" ceiling and find yourself in the foyer with a 13' beamed ceiling.
The center of the home gives you an open living area space with the combined great room, kitchen and dining room. The back wall of the combined dining room and great room is comprised of 30'-wide disappearing sliders giving you the best of indoor-outdoor living.
The master suite has two walk-in closets, sliding door access to the outdoors and a soaking tub plus oversized walk-in shower.
Upstairs, a large loft is perfect for gaming or watching movies and has a wet bar, private bathroom and outdoor access. Three additional ensuite bedrooms and laundry complete the upstairs.

What's Included

Elevations Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:

Material Labels
Floor-to-Floor Heights
Roof Slope Indicators

Floor Plans Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:

Door and Window Sizes
Completely Dimensioned Floor Plan
Room Labels and Interior Room Sizes

Electrical Layouts

Building Section Markers
All Electrical Outlets, Fixtures, and Switching

*Slab Plan Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:

Floor and Deck Joist Size and Spacing
Rough-in Plumbing Location (if applicable)
Mechanical Equipment Locations (if applicable)
Electrical Locations (if applicable)

Roof Design Plan Drawn at 1/8″ to 1/4″ = 1′-0″scale, and Includes:

All Beam and Header Heights and Locations
All Hips, Gables, Ridges, and Valleys
Building Section Markers

Building Sections Drawn at 1/8″ to 1/4″ = 1′-0″ Scale, and Includes:

Floor Joist Size and Spacing
Floor-to-Floor Heights
Non-Typical Plate Heights Indicated

Typical Wall Sections Drawn at 1/8″ to 1/2″ = 1′-0″ Scale, and Includes:

All Labels Indicating Wall Construction
Foundation Wall Thickness and Reinforcing
Insulation Type and Thickness

Miscellaneous Notes and Details

Miscellaneous General Notes
Stairway details (if applicable)

*We do provide a slab plan, however, the structural foundation plan is to be provided by the structural engineer selected by your builder or yourself. This is done because our slab plan cannot anticipate the variations in soil, footings and other conditions per your specific site. We provide the design of the roof as well, however, the truss layouts need to be provided by a truss engineer or your lumber company. Your builder can provide these contacts for you. Please keep in mind that these are additional expenses outside of the cost of the original plan that you purchase from us.

What's Not Included

Architectural or Engineering Stamp - handled locally if required
Site Plan - handled locally when required
Mechanical Drawings (location of heating and air equipment and duct work) - your subcontractors handle this
Plumbing Drawings (drawings showing the actual plumbing pipe sizes and locations) - your subcontractors handle this
Energy calculations - handled locally when required